Manual Valve - China Pneumatic&Electric Valve Manufacturer

The body is made of high-grade ductile iron, and its weight is about 20% to 30% lighter than that of traditional gate valves. The water hammer phenomenon is not easy to occur, and the service life is long. The carbon steel gate valve adopts PTFE sealing and is easy and flexible to operate. Easy to install and maintain. Rigid gates and elastic gates are available.

The Z41 flange rigid JIS gate valve uses a wedge-shaped gate as the opening and closing part. It is mainly used to connect and cut off the pipeline medium, and is not suitable for regulating the flow of the medium. Adopting a rising stem structure, the valve stem and gate plate rise and fall simultaneously during the opening process. When the gate valve is fully open, it is equivalent to a pipeline, with small flow resistance, simple structure and reliable use. It can achieve two-way sealing, the force required for switching is smaller than that of the stop valve, and the medium erosion has less impact on the sealing surface. Gate valves have a wide range of applicable pressures, temperatures and diameters, and are especially suitable for medium and large diameter pipelines.
It is widely used in oil, water vapor and other pipelines in petroleum, chemical industry, thermal power plants, etc.

WD71XN, WD371J rubber-lined, nylon wafer butterfly valve products adopt pinless connection technology. The valve plate is entirely covered with rubber or nylon to ensure complete isolation of the medium and metal, good wear resistance, and extended service life. The installation direction is not restricted by the flow direction of the medium. The product is suitable for seawater, sewage, oil, weak acid, alkali, salt and organic compounds, etc.

Stainless steel disc wafer butterfly valve has good corrosion resistance and durability. The butterfly plate has self-locking ability and can be stopped at any position, which can also improve the operating performance of the valve.
It is widely used as a regulating and intercepting device in fluid pipelines such as water supply and drainage, construction, air conditioning, sewage, chemical industry, food, medicine, textile and other industries.

D371FP and D371X worm gear butterfly valves are suitable for regulating flow and intercepting media in water supply and drainage pipelines such as food, medicine, textiles, and papermaking.
1. It is convenient and quick to open and close, labor-saving, dexterous has small flow resistance, can be installed at any position, and is easy to operate and maintain.
2. Unique structure and good low-pressure sealing performance.
3. The seals can be replaced, and the sealing material is resistant to aging, and weak corrosion, and has a long service life.
4. It can transport mud with minimal liquid accumulation at the pipe mouth.
5. Good adjustment, flow interception and non-return performance.

The epoxy resin coating of the wafer butterfly valve has good corrosion resistance, and the bonding strength with concrete is significantly reduced. It is suitable for industrial conditions in humid environments or corrosive media.

Stainless Steel Butterfly Valve
1. The connection between the butterfly plate and the valve stem adopts a pinless structure, which overcomes possible internal leakage points.
2. The outer circle of the butterfly plate adopts a spherical shape, which improves the sealing performance and extends the service life of the valve. It can maintain zero leakage after opening and closing under pressure for more than 50,000 times.
3. The seals are replaceable and the sealing is reliable and achieves two-way sealing.
4. The butterfly plate can be spray-coated according to user requirements, such as nylon or polytetrafluoroethylene.
5. The valve can be designed with flange connection and wafer connection.
6. The driving mode can be manual, electric or pneumatic.

Product name: Stainless steel turbine wafer PTFE hand operated butterfly valve
Connection method: wafer
Product specifications: DN50 65 80 100 125 150 200 250 300
Valve body material: stainless steel
Valve plate material: stainless steel
Sealing form: polytetrafluoroethylene

BLTD371X marine center spiral butterfly valve has novel design, unique structure, heavy and light, easy operation, rapid opening and closing; the sealing part can be adjusted and replaced, and the sealing performance is reliable. 

The products are widely used in water supply, drainage, and gas pipelines such as ships, medicine, chemicals, petroleum, electric power, textiles, papermaking, etc. to regulate flow and intercept media. They have the function of compensating for thermal expansion and contraction of pipelines.

Design standards are divided into national standards, Japanese standards, American standards, German standards, etc. 

D371X extended rod butterfly valve is mainly composed of valve body, valve shaft, valve plate, valve seat, extended rod and driving mechanism (handle, worm gear pneumatic device or electric device). The driving mechanism drives the rotating shaft and valve plate to rotate to achieve opening and closing. and the purpose of controlling traffic. The extension mechanism is mainly suitable for the operation of underground pipeline valves or inaccessible valves using an extension transmission device. The product is widely used in system pipelines such as water treatment, shipbuilding, chemical industry, petrochemical, smelting, medicine, food, etc.

The opening and closing part of the carbon steel butterfly valve is a disc-shaped butterfly plate that rotates around its own axis in the valve body to achieve opening and closing or adjustment. The use of a scale indicator plate not only makes the butterfly plate self-locking, allowing the butterfly plate to stop at any position, but also improves the operating performance of the valve. It is widely used as a regulating and intercepting device in fluid pipelines such as water supply and drainage, construction, air conditioning, sewage, chemical industry, food, medicine, textile and other industries.
1. Opening and closing is convenient, fast, labor-saving, has small fluid resistance and is easy to operate.
2. Simple structure and good low-pressure sealing performance.

D341F, D341X flange soft-sealing PTFE butterfly valves have a novel design structure, small overall size and light weight; the butterfly plate adopts double eccentricity, opening and closing quickly, and the operation is light and labor-saving; there is no sliding friction between the butterfly plate and the sealing ring, and the sealing surface is wear-resistant , long service life, reliable sealing and easy adjustment.

D341F, D341X flange soft-sealing EPDM butterfly valves have a novel design structure, small overall size and light weight; the butterfly plate adopts double eccentricity, opening and closing quickly, and the operation is light and labor-saving; there is no sliding friction between the butterfly plate and the sealing ring, and the sealing surface is wear-resistant , long service life, reliable sealing and easy adjustment.

LTD71X lug-type 4 inch butterfly valve can be driven by manual, worm gear, pneumatic or electric. The structure is centerline type, and the sealing structure is soft seal. It has a simple structure, small size and light weight, and consists of only a few parts.

It only needs to be rotated 90° to open and close quickly, which is simple to operate. At the same time, the valve has good fluid control characteristics. When the butterfly valve is in the fully open position, the thickness of the butterfly plate is the only resistance when the medium flows through the valve body. Therefore, the pressure drop generated by the valve is very small, so it has good flow control characteristics.

The products are widely used for regulating and intercepting pipelines in water treatment, shipbuilding, chemical industry, petrochemical, smelting, medicine and food industries.

Fleyenda D341W ventilation butterfly valve is a non-closed butterfly valve. It is designed and manufactured in a new structural form by welding a midline butterfly plate and a short structural steel plate. It is welded with high-quality wear-resistant materials, has a compact structure, is lightweight, has small flow resistance and large flow, avoids the influence of high-temperature expansion, and is easy to operate. The products are widely used in ventilation systems, dusty gas, gas, air, high-temperature flue gas pipelines, ventilation and purification devices, etc. for opening and closing or regulating flow.

The Flange Telescopic Butterfly Valve for temperatures less than 80 is used in petroleum, chemicals, food, medicine, textiles, papermaking, power, water supply and drainage, gas pipelines, and adjusting the flow and closure of the role of media. The utility model has the function of heat expansion and cold contraction in compensating pipelines.

Because the wafer butterfly valve of this product adopts the three-dimensional eccentric principle design, the space motion trajectory of the sealing surface is idealized, there is no friction and interference between the sealing surfaces, and the sealing material is selected properly so that the butterfly valve has a sealing performance and corrosion resistance. The high temperature resistance and wear resistance have been reliably guaranteed. lts main features are as follows:
1. The opening torque is small, flexible, convenient, labor-saving and energy-saving.
2. The three-dimensional core structure makes the butterfly plate tighter and tighter. Its sealing performance is reliable and leak-free. 
3. High-pressure resistance, corrosion resistance, abrasion resistance, long service life, etc.

D341F、D341X Flange type soft sealing turbine triple eccentric butterfly valve has a novel design structure, a small overall size and is lightweight; The butterfly plate adopts double eccentricity, which can be opened and closed quickly, and the operation is light and labor-saving. There is no sliding friction between the butterfly plate and the sealing ring, the sealing surface is wear-resistant, has a long service life, reliable sealing and easy adjustment.

The single-piece manual ball valve often results in a compact and lightweight valve. This design minimizes potential leak points, enhances structural integrity, and simplifies manufacturing.

Fleyenda Valve Manufacturer offers 1PC 2PCS 3PCS stainless steel/WCB ball valves. Straight, 3-way, cross ball valves are available. Contact us for ODM service.